A Revolutionary Product in Water Diverter Technology

Technical Details ...

PRODUCT DETAIL

REVERSE-FLOW DIVERSION VALVE

  • Designed to stop stagnant water in underground pipes entering the tank
  • Fitted at the riser
  • Easy to Install
  • Diversion is Adjustable
    Allowing complete control over the quantity of water to be delivered
  • Fully Automatic
    Once the lever is set it will shut and reset automatically
  • Internal Stainless Steel Leaf Screen
  • Available in 90mm and 100mm
  • Connector to 90mm storm-water pipe is available
    Attached to base of SafeRain to direct waste water away from the tank via 90mm storm water pipe
  • SafeRain is Compact
    Maximum weight when in use is approximately 3 kg
  • Backed by a 2 Year Warranty
  • Extends the Life of your Tank
    By keeping corrosive material out of it
  • Tested by the CSIRO*

TECHNICAL DETAILS

Typically the unit closes at flow rates between 10 litres/min and 20 litres/min adjustable. Any small debris left behind in Fig. 4 is flushed out with the next rain. Large leaves, sticks etc are caught in a detachable screen accessible by the screw access.

The above unit is available in both 90 and 100mm sizes. Once a SafeRain is fitted, polluted water diversion of between 5-1,000 litres is possible depending on setting.

Fig. 1: When rain starts, the stagnant water is dumped from the base of the SafeRain valve.
Fig 2. After the polluted water is dumped, the valve shuts automatically. Clean water is then diverted to the tank.
Fig. 3: When the rain stops SafeRain can remain closed for approximately 24 hours. Any further rain during this time goes to the tank.
Fig. 4: SafeRain will drain completely resetting the unit automatically for the next rainfall.