SafeRain - A Revolutionary Product in Water Diverter Technology

A Revolutionary Product in Water Diverter Technology

Rainwater Harvesting

Reviews

Links

Technical Details ...

PRODUCT DETAIL

HORIZONTAL DIVERSION VALVE

Designed to be installed at the overhead pipes feeding a tank
Easy to Install
Diversion is Adjustable
Allowing complete control over the quantity of water to be delivered
Fully Automatic
Once the lever is set it will shut and reset automatically
Internal Stainless Steel Leaf Screen
Available in 100mm
90mm Adaptors available for 90mm pipe
Connector to 90mm storm-water pipe is available
Attached to base of SafeRain to direct waste water away from the tank via 90mm storm water pipe
SafeRain Is Compact
Maximum weight when in use is approximately 3 kg
Backed by a 2 Year Warranty
Extends the Life of your Tank
By keeping corrosive material out of it
Tested by the CSIRO*

TECHNICAL DETAILS

Typically the unit closes at flow rates between 10 litres/min and 20 litres/min adjustable. Any small debris left behind in Fig. 4 is flushed out with the next rain. Large leaves, sticks etc are caught in a detachable screen accessible by the screw access.

Once a SafeRain is fitted, polluted water diversion of between 5-1,000 litres is possible depending on setting.


Fig. 1: When rain starts, the stagnant water is dumped from the base of the SafeRain valve.	Fig 2. After the polluted water is dumped, the valve shuts automatically. Clean water is then diverted to the tank.	Fig. 3: When the rain stops SafeRain can remain closed for approximately 24 hours. Any further rain during this time goes to the tank.	Fig. 4: SafeRain will drain completely resetting the unit automatically for the next rainfall.